1:It will detect and alarm immeiately when door and window is open,also can programe with remote control and detecot function.
2:It’s much collocated with home decoration.
3:It can working with PIR sensor,door sensor, emergensy button etc.
Model No.: KR-D2
Working Voltage:3V
Standby Current: <10mA
Working Current: >70mA
120DB Alarm Sound
It can be alarming directly to prevent the intruder from doors and windows, when magnet is separated from contact
LED Lights Flash
When the contact and magnet were separated; the LED will light 1 second; and it will be alarming immediately
Linkage Alarm
the wireless door sensor alarm host connects with PIR detector, door sensor, gas detector, smoke detector and emergency button etc
as much as 10 detectors and 20 remote controls
Remote Control
Low Battery indicator
once the sensor working under low battery, it will “du du du ……”
AAA 1.5V *2 Batteries
KIT1
1 X D2 Wireless door sensor
1 X Remote control
1 X User manual
KIT2
1 X D2 Wireless door sensor
2 X Remote control
1 X User manual
KIT3
2 X D2 Wireless door sensor
1 X Remote control
1 X User manual
KIT4
1 X D2 Wireless door sensor
1 X Remote control
1 X Door Sensor
1 X User manual
KIT5
1 X D2 Wireless door sensor
1 X Remote control
1 X P819 Pir detector
1 X User manual
KIT6
1 X D2 Wireless door sensor
1 X Remote control
1 X P819 Pir detector
1X Door Sensor
1 X User manual
KIT7
1 X D2 Wireless door sensor
2 X Remote control
2 X Door Sensor
1 X User manual
KIT8
3 X D2 Wireless door sensor
2 X Remote control
1 X P819 Pir detector
1 X User manual
KIT9
2 X D2 Wireless door sensor
2 X Remote control
2 X Door Sensor
1 X P819 Pir detector
1 X User manual
Product detail
Installation introduction
1.Please be noted the following situations; in case of it can’t be used once finished the installation.
2.Don’t be installed the place where it was easy been broken.
3.Don’t be installed the place where the base isn‘t stable.
Installation and Usage of Door Sensor
Door sensor is used for sensing the closing and opening state of the door, and is consisted of transmitter and magnet two parts. It can be installed on doors,windows or any object that can be closed and opened. When transmitter isseparated from the magnet, door senser will send alarm signal to alarm panel,host will alarm.
Installation and Use of PIR Motion Detector
Before use, make sure the power switch of PIR motion sensors is ON. Installation height is about 2.2 meters above ground and it should be installed in the cornerof the room to get the best detection range. At the same time, it should form a certain angle with the walking line ( 90 degree angle is best for detection)